Pre-Glued Woodwind Key Cork Strips 4 Pack (Natural)


Using these strips is the best and fastest method of installing all-natural key cork on woodwind instruments! The strips already have adhesive installed on one side that is heat activated. Simply remove the key from the instrument, remove the old cork and clean the surface of the key with rubbing alcohol. Heat the key with the alcohol lamp and press the cork into place. Allow the key to cool and then trim off the excess cork with the razor blade. Cork thickness can be adjusted by light sanding of the cork.

This kit includes the following:

(4) Pieces of pre-glued, Instrument Clinic Natural Cork (9/16" x 4") in the following thicknesses: .8mm, 1.2mm, 1.6mm, 2.4mm
(1) Razor blade

Add to Cart:

Your IP Address is:
Copyright © 2021 Instrument Clinic USA. Powered by Zen Cart